IT IS RISKY, I WON'T BE RESPONSIBLE FOR CONSEQUENCES Prerequisites:
Make sure your Mobile phone is charged above 50%. if your phone haven’t charged enough then start charging it at minimum 50%
usb driver for unite 3 q372
here
If you have Installed any Antivirus Software into your Pc/Laptop, then be sure that you have disabled it for some time, because it may affect this procedure sometimes.
USB Data Cable
Tutorial To Flash Stock ROM Firmware On Micromax Unite 3 q372:
steps:-1. Before starting this procedure, Download Micromax Unite 3 q372 stock firmware file from
here
2. Make sure you Have Sp Flash tools in your Pc / Laptop, if you don’t have then Download from
here
3. Now Extract Micromax Unite 3 q372 firmware file.
4. Extract sp flash tool and open sp flash tool.exe (you will find this from the extracted sp tools files)
5. once sp flash tool is Launched, Click on the Download Tab.
6. In the Download Tab, now click on the scatter-loading button.
7. Now, Lcoate the
scatter file (you will find the scatter file in the stock rom folder).
8. Now , click on the
Download Button to begin the flashing process.
9. Now Connect your Unite 3 into Pc/Laptop (Without Battery) using USB Cable. now it will start flashing firmware into your unite 3
10. Now it will take 3-15 minutes for flash firmware (Depend on your Computer Speed)
After process successfully complete, it will show you green circle,
, it means firmware flashing is successful & Now close the sp tool on your pc/laptop and disconnect your unite 3 phone and Put battery into your Mobile Phone & Turn it on normally.
your mobile phone may take 5-10 minutes for start at first time.
This was easiest guide for flashing Stock firmware into your Micromax Unite 3 q372 mobile Phone.
if you have any problems or suggestions related to this guide, then feel free to comment below. i will respond .
{{ Earn money Download app and register your number and get talktime }}